LSM Technologies
ROTIS™ (Ride-On Tyre Injection System) is a pneumatic drum pump designed to install Ride-On TPS tyre sealants into tyres without the need to deflate them.

ROTIS™ (Ride-On tyre Injection System) is a pneumatic drum pump designed to install Ride-On TPS tyre sealants into tyres without the need to deflate them. The air that’s in the tyre stays in the tyre – which means the job gets done faster. Whether you are on a service call, in the yard, or working in a service bay, ROTIS™ will save you time and money.

With ROTIS™, you accurately inject Ride-On into fully pressurised tyres (up to 792 Kpa- 115 psi), on or off your vehicles, up to 15.24 metres (50 feet) away from the product source. No more hand pumping. And, no more wasted time re-inflating tyres. You can remotely reset the pump for installation in multiple tyres without needing to walk back to the control panel. Controls are where you need them – at your fingertips. ROTIS™ includes it's own air line for inflating any tyre. There's no need to run separate air lines. Quality. Durability. Simplicity. Reliability. We engineered and built ROTIS™ to handle tough jobs ... the way you want it done.

Features

Fast, accurate and efficient. Just set the meter to the desired dosage and the ROTIS™ pump does the rest – shutting off when the desired amount is installed. Now, it’s possible to install Ride-On into an 11R22.5 tyre at 689 kpa (100 psi) in less than 30 seconds.

In field tests under rigorous, real-world working conditions, ROTIS™ pumps turned more than 10 million cycles and are still running!

ROTIS™ is supplied with everything you need:

  • 15 Metre (50 foot), 19.0 mm (3/4”) steel reinforced, high-pressure product installation hose.
  • 15 metre (50 foot), 0.375 mm (3/8”) high-pressure industrial air hose.
  • Quick-connect installation tools for dual-wheel assemblies.
  • 2 valve core removal tools, dosage table and installation manual.

Specifications

  • Each pump is calibrated to insure trouble-free operation, reliability and accuracy.
  • Maximum inlet pressure 1103 kpa (160 psi). No electrical hookup required.
  • Stall-free, ice-free motor design requires absolutely no mechanical assist devices such as trip rods or push pins.
  • All wetted materials (cylinder/plunger) are made of 316 stainless steel for years of trouble-free operation.
  • The pump housing is made of 304 stainless steel.
  • One year Limited Warranty (refer to Limited Warranty description for details).
  • Manufactured and assembled in the USA. Patent pending.

This website and its contents © LSM Technologies Pty Ltd. All rights reserved.