Once of Australia's largest Construction Company's have been implementing LSM Technologies Crane Camera Viewing Systems on their various Cranes / Construction Sites for more than 3 years now. To date they have installed more than >20 x of their Cranes with our technology, enhancing Safety, Equipment Damage Control and Productivity.
Electrical Cabinets and Enclosures are often located in high dust areas where they inundated of contamination filtrates into the Electrical Equipment, causing over heating, electrical shorts, malfunction, and premature failure of components – all of which is Costly and causes severe loss of Production. LSM Technologies has the solution with our RESPA® CF Vortex HyperFLOW™ for Electrical Control Cabinets so as to reduce or eliminate contamination in large and small Electrical Cabinets- and Enclosures of Mobile and Fixed Plant on Mining / Earthmoving, Cell Towers, Bus Alternators- any enclosure or equipment that requires a contamination free environment. The solution is simple- mount a RESPA® CF Vortex HyperFLOW™ to your Cabinet / Enclosure with either a MERV+ or HEPA H13 / H14 Filter Element + an (optional) ICPS Pressure Sensor Monitor Unit to monitor the Cabinet Pressure and Alert for Filter change- and you have the worlds most effective solution to reduce / eliminate Particulate Contamination from your Cabinet or Enclosure. The RESPA® CF Vortex HyperFLOW™ is a self contained / stand- alone unit with an active 24vdc Blower that will deliver upto 350 pascal of Cabinet Pressure (it will never over- pressurise) and >35-50 litres / second of Air Flow for Cooling. If you need more Air- flow- then simply add another RESPA! For more information please contact us.
After evaluating the LSM Technologies Tyre Pressure / Temperature Monitoring Systems (TMS) and Online Telematics Fleet Management System on their Heavy Haulage Truck Fleet and HME for more than 12 months, BGC Contracting (www.bgc.cc) has given the "Green Light" to continue implementing our technology across their WA and SA mining operations.
To enhance Safety and Operator Visibility, Hyster / Adapta- Lift chose LSM Technologies Heavy Duty Collision Awareness Technology for their Tyre Handlers / Fork Trucks.
Sibelco selects RadarEye Solutions for enhanced Operator Visibility + Proximity Detection to mitigate V2V (Vehicle to Vehicle), V2P (Vehicle to Person) and V2I (Vehicle to Infrastructure) interactions.
One of Australias leading Heavy Haulage Operators implements LSM Technologies (DFM) Driver Fatigue Monotor on nealry 30 of thier Rigs to improve Safety of their Operators
After 18 months of evaluations, consultation and development with LSM Technologies and solution partner, Blackbox Control, Alinta Energy’s Leigh Creek Coal Mine operation has commenced fitting our Doran Tyre Pressure Monitoring System on all their 17 x Terex 4400 and Komatsu 830E Dump Trucks.
After losing a Kenworth C Truck to a Tyre Fire while hauling Iron Ore, Dave Collins- owner of Collins Truck Parts - decided to take a preventative approach and contacted LSM Technologies to supply and install their Doran MITRE Multi-Tow Tyre Pressure / Temperature Monitoring System onto his new Kenworth C Trucks
Queensland City Councils have implemented RESPA Quality Cabin Air System on their Lawn Mowers to enhance protection of their Operators Health and extend the Service Life of their HVAC Systems.
LSM Technologies Engineering Team designing RESPA Quality Cabin Air Systems Kits for Light Vehciles. The RESPA Kit is ideally to solve Fatigue, Co2 Concentration, Particulate, DPM and Fibre exposure.
Dave Hunter, a.k.a. "Hunner" of Arkansas, a photographer and off-road enthusiast, built up a 2008 H3 Alpha V8 for and uses our Series 9000 Engine Precleaner for his "excellent adventures" .
A Mining Operator's Dozer Engine was under- performing as the Engine Air- intake System Filter Element was "choking" after only a few hours of operation. LSM Technologies was asked to assist with the issue and design / select an Engine Air Precleaner Solution.
Sy-Klone Engine Precleaner Series 9000 on Heavy Haulage Power Trailer extends Filter Service Life, Protects Engine and enhances Safety.
LSM Technologies Engineering Team designing RESPA Quality Cabin Air Systems Kits for Kenworth 500 Series Trucks / Prime-movers. The Kenworth 500 Series are typically utilised for Heavy Haulage and Off- road Operations and the RESPA Kit is ideally to solve Fatigue, Co2 Concentration, Particulate, DPM and Fibre exposure.
LSM Technologies Engineering Team have designed RESPA Quality Cabin Air Systems Kits for Fixed Plant Cabins and Enclosures for the highest protection against Fatigue, Co2 Concentration, airborne Particulate, Fibre and DPM exposure.
LSM Technologies Engineering Team designing RESPA Quality Cabin Air Systems Kits for Komatsu Wheel Loaders WA430-470 and 480 (dash 6 series) and Excavators PC130- 450 (dash 8 series) / Hybrid's (dash 1) solving Fatigue, Co2 Concentration, Particulate, DPM and Fibre exposure in Mobile Plant Cabins.
LCR Group have continued to roll- out LSM Technologies MTR360 TPMSystems on their Heavy Haulage Fleets having achieved upto 120,000 kms already without issue.
LSM Technologies provides a complete retrofit RESPA Cabin Quality Air System kit, engineered specifically for Hitachi Shovels. It provides a first-fit totally integrated solution for installation to factory HVAC Systems for Hitachi Shovels EX8000, EX5500, EX3600, EX2500 and EX1900.
Ray Cully- renowned Journalist and Photographer has written a glowing review on LSM Technologies / Doran TPMSystems- in fact it has already saved him on his travels.
LSM Technologies Distributor in South Australia- HeavyAir Pty Ltd is providing un- surpassed Service and Professionally designed RESPA Quality Cabin Air Technology now to their customers Fleets- enhancing Operator Health and providing extensive HVAC Cost- downs. Phil Wilkins the Managing Director of HeayAir speaks about his experiences to date.
Tully Sugar Mill / Cane Haulage Truck Fleet selects LSM Technologies Camera Viewing Solutions.
Ray Cully a renowned Journalist and Photographer for various magazines and resident 4x4 Journalist for the West Australian Newspaper headed off around Australia and tested our Ride- on AUTO / SUV Tyre Sealant / Balancer and RV360 Tyre Pressure Monitoring System.
Orlaco Products has developed quality camera systems for ARFF (Aircraft rescue and firefighting) vehicles. What’s more, our Safety Systems are fully DEVS compliant.
Major Mine Operator selects RadarEye Camera / Proximity Detection Systems for LeTourneau Dozers to enhance Safety.
A leading Quarry Operator has implemented an evaluation of our new RadarEye- Safety Camera Viewing and Radar Proximity System on their Wheel Loader.
LSM Technologies have recently installed the very latest Doran MTR360 Multi-Trailer Tyre Pressure Monitoring Systems (TPMS) with SafetyTrax online reporting on LCR Mining Groups' Heavy Haulage Fleet.
LSM Technologies are proud to announce our new Distributor in Western Australia-Crane Safety Systems & Repairs.
LSM Technologies are proud to announce our Distirbutor in South Australia- HeavyAir Pty Ltd.
LSM Technologies recently installed a Camera Viewing Solution for a Komatsu PC4000 Excavator consisting of their latest Orlaco Heavy Duty Camera System components.
LSM Technologies adds to their Orlaco Viewing Solutions integrated RadarEye for enhanced Situation Awareness , Proximity Detection and Collision Avoidance.
For those that are using our Sy- klone RESPA Technology- and for those not yet- then some exciting news, with the release of our new and improved Sy- klone RESPA®-CF Vortex HyperFLOW™ Technology Quality Cabin Air Systems for both Mobile and Fixed Cabins.
A large Copper Mine in Mt Isa tested and selected LSM Technologies Doran Tyre Pressure (and temperature) Monitoring Systems for their Heavy Haulage Trucks.
LSM Technologies once again was invited (Resourceful Events) to provide a Presentation on the ISO 5006 / 16001 Standards for Mitigation of Opera or Visibility “Blind Spots” related to fatalities, injuries and HPI's, associated with Vehicle to Vehicle (VIV), Vehicle to Person (VP) and Vehicle to Infrastructure (VI) interactions.
LSM Technologies are proud to be the Gold Sponsors of the Informa 3rd Annual Collision Avoidance in Mining 2012 Conference and Exhibition to be held on the 19th- 20th March 2012 at the Esplanade Hotel Fremantle- Western Australia. The theme will be: "Changing course in mine safety – moving toward a paradigm of zero harm".
Ride-On Wins Turkish Tyre Sealant Protection Solution for Emergency Response Vehicles.
LSM Technologies designed, supplied, installed and commissioned a complete Safety Viewing Solution for the Fire and Rescue NSW Aerial Platform / Sky- lift Unit.
STERLING, Va., Feb. 8, 2012 /PRNewswire/ Custom Chrome Inc., one of the world's largest independent suppliers of aftermarket parts and accessories for Harley Davidson Motorcycles, plans to add Inovex Industries, Inc.'s Ride-On Tire Protection System (TPS), the only proven high-speed tyre balancer and tire sealant, to their international product list.
LSM Technologies received the first order to supply, install and commission a Load and Winch Viewing Camera Solutions for one of the largest Mine Operations in the world.
Sarens equips Cranes with Orlaco Camera Viewing Solutions-as a Standard!
Doran TPMSystems and & Ride- on Tyre Sealants tested in the Australian Outback by Allan Whiting- renowned 4 x 4 Journalist
Nolan's Transport have successfully evaluated the LSM Technologies RIDE- ON Tyre Protection System- Sealants and have decided to install throughout their fleet, so as secure the substantial benefits and cost- downs that this technology will bring to their operations / industry.
During a recent travel to the USA, Peter visited a few of Ride- on's customers with one significant end- user- Robertson's Ready Mix- is a large Transport and Quarrying company that experiences extensive savings with the use of the Ride- on CHS Tyre Protection System- Tyre Sealants.
Well there is nothing like personal experience to prove that one has selected the best technology to offer their customers! Recently our Managing Director- Peter Woodford had a couple of experiences that did just that- and here is his "testimonials"!
LSM Technologies is the major sponsor and will be presenting at the Criterion "Maeasuring and Managing Safety in Mining Conferfence" to be held on the 29th / 28th June 2011 in Perth Western Australia at he Novotel / Langley Hotel.
Sy- klone RESPA PFP is a proven technology when it comes to providing clean air filtration using either its Merv 16+ or HEPA grade Filter Elements.
LSM Technologies has developed a DYI-RESPA SD+SDX+ICPSensor Kit for those that wish to complete their own installations on Fixed Cabins.
Back in Feb 2010 a major Iron Ore Mining Company ion WA conducted evaluations using our RESPA PFP Technology to provide a healthier environment, cleaner cabin and reduced failure of their HVAC systems in Light Vehicles- today it has become a standard!
This short video clip depicts the inspection of a HVAC / Cabin Panel Filtration Box in a Dusty / Toxic Waste application that fails incredibly.
No Cabin is to large for the RESPA HVAC Air Precleaner + Filtration + Pressuriser Technology. Recently LSM Technologies supplied, installed and commissioned a "Double" RESPA PFP System to a large Quarry Operators Crushing Cabin
RESPA HVAC PFP (Precleaner + Filtration + Pressuriser) technology proves its worth in Drill Rig Cabins.
As like with many Tyre OEM's, Inovex Co has maintained close relationships over the past nearly two (2) decades due to the proven performance of their specialised Ride- on TPS (Tyre Protection System) Tyre Sealants.
Tyre Handlers at one of our mine sites clients have now been updated with the latest LSM Technologies Camera Viewing Solution so as to further enhancement to safety.
LSM Technologies Orlaco Camera Viewing Solutions for Cranes are unique and are designed to resolve (Tower, Crawler, Mobile, etc) Crane Operator Visibility issues according to ISO5006 / EN13000 Standards.
ThyssenKrupp, the German-based manufacturer and market leader in hydraulic elevators, specifies LSM Breather Technology to eliminate costly downtimes caused by fluid contamination.
LSM Technologies recently designed and installed an Orlaco Load View Camera System on a Luffing Crane to ascertain if a hoist line camera would give clear vision to the Crane Operator whilst completing "blind" lifts".
Orlaco is the world leader in Camera Viewing Solutions and one application that they have been predominant in is Camera Systems for Crane Load Viewing.
RESPA SD+SDX+ICPSensor PFP "Clean Air" Systems were recently installed on 5 x Crusher Cabins at quarries so as to improve the Comfort and quality of air to the Operators.
Early in 2009 at a Limestone Mine in North-eastern United States one of thier Excavator Cabins was cited by the Mine Safety & Health Administration (MSHA) as needing immediate improvement, as the permissable exposure limits (PEL) for diesel particulate matter (DPM) for the operator were exceeding the 160 µm3 maximum daily exposure rate. Solutions that worked for larger particulate were ineffective at reducing the DPM exposure.
MSHA Enforcement: RESPA-SD saves Underground Silica Mine Thousands in MSHA Fines with Respirable Crystalline Silca (RCS) Exposure reduced from high of 667% of Personal Exposure Limit (PEL) to as low as 37% of PEL.
Graham Emmerson of Emmow’s Pty Ltd, states “We were sceptical of yet another company making claims it had technology....."
LSM Technologies / Ride- on TPS Tyre Sealants provide big savings for Queensland Recyclers (Alex Fraser Group of companies) on their large Loader Tyres.
Recently Corbets Machinery had flat tyres on his Wheel Loader. The tyre fitter after inspection found a significant number of injuries and advised that the tyre was irreparable and therefore required replacement.
Recently, the Sy- Klone RESPA HVAC PFP (Precleaner+ Filtration+ Pressuriser) was evaluated by the QME (Queensland Mines & Energy) Mines Inspectorate Health Surveillance Unit.
The RESPA SD / SDX Ultimate solution was installed on a WA320 PZ-6 Wheel Loader for a Cement Plant application- and is Komatsu SMART approved.
The Western Australian Mining- especially up North in the Pilbara- is one of the harshest and dusty environments. known to man. With very little rain fall, scarcity of water for dust suppression and temperatures that can exceed 52 degC- then this is where our RESPA SD / SDX Ultimate PFP- HVAC solutions thrive!
The QME (Queensland Mining and Emergy)- Mines Inspectorate- Health Surveillance Unit monitored the RESPA SD / SDX installation over a 5 month period prior and found that the RESPA Units provided a 9 x times reduction of OEL (occupational Exposure Limits) for RCS Dust to a virtually undetectable level of 0.03 mg / M3. See their preliminary report at this link.
The RESPA SD / SDX Ultimate PFP- HVAC solutions are not just for Mining / Earthmoving Equipment / Mobil plant. The technology is ideally suited for Fixed Plant Cabins (eg Crusher Cabins, Electrical Cabinets / Rooms), other Mobile Plant such as Locomotives, Bobcats, Compartments (Electrical, Compressor, Motor)- and yes even Mine Site Service Crew LV's (Light Vehicles) and Trucks.
City Upgrades its Mower Cab to Enhance Operator's Safety and Comfort Hot humid weather and difficult terrain combine to produce a challenging cab environment.
For many years, fire fighting dozers have been open cab machines. With the advent of heavy duty HVAC systems and the ability to build integrated sealed cab environments, enclosed cabs on Fire Dozers have become a reality.
Recently Komatsu installed both RESPA SD (External Air) and SDX (Internal Air) units on a WA500 Wheel Loader operating at a Western Australia Port Handling Facility.
Extra attention for the Scania- Orlaco Camera System- launch of the new R Series Trucks
Orlaco Cameras face the hardest rally in the world: the Dakar.
Peter Welsh is off on around Australian trip with a caravan of 4 x 4 enthusiasts to see our beautiful country. Peter wanted to ensure he maximised engine performance, fuel economy and protection of his 4.2 litre turbo diesel Nissan Patrol- so he chose to fit our Series 9000 Engine Precleaner to his Safari Snorkel.
Boral Quarries adds two more LSM Technologies / Orlaco Camera Viewing Solutions to their Orange Grove Plant in Western Australia.
Stockleigh Plant Hire- John Kennedy is another avid supporter of LSM Technologies Ride- on Tyre Protection Systems gaining productivity, lower costs and saving heaps of time and money on punctures to his Toyota Huski Skid Steer Loader.
Ron from Hans Steel Pty Ltd had Steer Tyre vibration on his Western Star Constellation. He was going to replace the Tyres but within 30 minutes of applying Ride- on- vibration was gone!
Ashton & Son primarily contracts in Brisbane's Northern Suburbs as an Bobcat Owner/Operator. Operating sites are in the construction industry where they experience multiple punctures to their tyres on a daily basis- and now they use Ride- on and have none!
Frank owns a successful business (Platinum Vegetation Services), maintaining Queensland motorways side strips and these area contain a large amount of potentially tyre damaging debris such as - Glass, wire and pieces of steel.
Have the boys at LSM Technologies found the best thing since disc brakes for motorbikes? Just came back from a "quick" and technical 200k ride and the deceleration wobble has completely gone :) The bike feels amazingly good even considering how bad the tyre's really are!! This stuff really works, and its cheap!!
Sy- klone Series 9000 Engine Air intake Precleaners prove to be the best ejective Precleaner even in the snow. The principal reason for taking snow out of the air stream prior to it reaching the air filter housing or paper air filter is that, ultimately, snow is frozen water.
Wayne, known as "Nugget" on the HummerXClub forum, has just returned from a 6,200 kilometre trip through the Australian Outback. His trip included 1,500 km of dirt and he was full of praise about the excellent performance he got out of his Sy-Klone Series 9000 from LSM Technologies.
LSM Technologies has provided Linde Forklifts with Orlaco Cameras for Cold Storage and Visual Height Solution to one of their customers - Versacold- with the delivery of six (6) new Forklifts.
LSM Technologies has provided Adapt-A-Lift with Orlaco Cameras for Visual Height Solutions to one of their customers - Coca-Cola Amatil on Nichiyu FBRF20 Reach series Forklifts.
Tractor cabs are notoriously dusty environments. Fresh air is drawn into the HVAC system from behind the tractor, where the air is already filled with airborne dirt, fertiliser, pesticides, and allergens. The fresh air filter is quickly overwhelmed.
Another testimonial to the new HVAC RESPA Precleaner + Filtration + Pressuriser technology provided by LSM Technologies on an Excavator working in a Cement Klinker Grinding Plant- one of the worst case scenarios of saturated atmospheres every experienced!
This report (download below), is based upon recent testing by CDC’s National Institute for Occupational Safety and Health (NIOSH) of LSM Technologies / Sy- Klone's "world first" patented RESPA™ HVAC Precleaner / Filtration Technology as technology that "should be considered for all new and retrofit systems in surface mining equipment so as increase the Protection Factor (PF) for Operators Health.
LSM Technologies / Sy- Klone Engine Air Precleaner Technology depcits substantial benefits and savings on a Ranger 210E Excavator.
The Gulf Wars highlighted the need for a method to protect engines from sand. In many cases, engines were failing in a matter of days, needing to be rebuilt before they could be returned to use. Sy- Klone Series 9000 Engine Air Intake Precleaners were the solution.
The new ISO 5006: 2006 Standard for Earthmoving Equipment- Operators Visibility has been released and is now "recommended" by the ISO Organisation for compliance on all Earthmoving Machines.
LSM Technologies / Sy- Klone RESPA HVAC (Heating / Ventilation / Air- conditioning) Air Precleaner Technology was installed on a Komatsu WA320 Wheel Loader so as to primarily improve PF (Protection Factor) for the Operator.
Hanson- Wolffdene Quarries have utilised LSM Technologies Autogreasers and Technical Services for more than 5 years now and as a testimonial they have achieved more than 25,500 machine hours on a WA500 Wheel Loader LSM Technologies Autogreaser.
Recently NIOSH (National Institute of Occupational Safety and health) in the USA tested the new LSM Technologies / Sy- Klone RESPA™ HVAC Precleaner Technology conjunction with Vulcan- a large OEM of Drill Rigs.
One of Simms Metals plants in Brisbane have changed to LSM Technologies / Orlaco Camera Viewing Solutions for their Komatsu Loaders.
In January 2008- Boral Orange Grove selected LSM Technologies / Orlaco Radio Frequency (RF) Camera System mounted on a Dump Truck / Silo Product Filling Station process.
In Dec 2006, this Motivator was designed / supplied by Wave Engineering and was a perfect application for LSM Technologies / Orlaco Camera Solutions.
In Dec 2007- LSM Technologies agent in the Bowen Basin- Videotronics- and their skilled technical team recently installed our LSM Technologies / Orlaco Camera Viewing Solution for on LeTourneau Wheel Loaders- one of the largest in the World.
LSM Technologies Bowen Basin Distributor Videotronics recently installed an intricate and integrated CCTV Camera System using Orlaco Cameras, on a Bucyrus Drag-line 303- model 8750.
LSM Technologies Distributor for the Bowen Basin- Videotronics and their skilled technical team recently installed an Orlaco Camera Solution for BMA- CAT Heavy Duty Low Loader.
Consolidated Minerals Limited- Woodie Woodie Mine Site have selected LSM Technologies / Orlaco Camera Solutions for their Dump Trucks. Woodie Woodie Mine site originally tested a less expensive Camera System on 3 of their Dump Trucks, which unfortunately lasted only a week before failure and so LSM Technologies mobilised immediately to site and replaced the cameras with our Orlaco Camera Systems.
Rocla Batching Plant in Perth choose LSM Technologies Orlaco Cameras for thier Loaders.
Australian Bulk Minerals (ABM Mines)- Savage River Mine site have chosen LSM Technologies / Orlaco Camera Solutions for all their HME Equipment.
Orlaco are at this time the ONLY Camera that is compliant and can replace the additional three (3) mirrors required by the new regulation.
Public safety and preventing / reducing damages remains priorities for TNT Holland.
LSM Technologies has provided Linde Material Handling with another Orlaco Camera Solution for one of their customers- Berri Juices on a R115 series Forklift.
BMA Mines Sites are utilising LSM Technologies / Orlaco Camera Solutions on all sorts of different heavy duty equipment, with the most recent application on a large Kenworth C500 / C510 Rigids used as Lube / Service Trucks.
Oxiana Scuddles Underground Mine Site in Mt Magnet / Yalgoo Western Australia have installed their CAT AD55 Articulated Dump Truck with LSM Technologies / Orlaco Camera Solutions.
LSM Technologies provides our Orlaco Camera Solutions to Westrac in Perth WA with another application- being their Water Trucks.
Shell have been utilising Orlaco Camera Viewing Solutions since 1994 and as can be seen from the reference letter, they are more than happy with the quality, performance and reliability.
KLM use Orlaco Camera Viewing Solutions to assist the Operator in locating the Refuelling Nozzle when refuelling Aircraft.
TNT is the biggest postal services distributor in the Netherlands and has equipped many of it’s vehicles with Orlaco’s Front and Rear vision Cameras- reducing vehicle damage by 75%.
John Jamienson (Maintenance Manager), for Ranger Valley Farms uses only LSM Technologies Lubrication Systems for his equipment.
Komatsu fits another LSM Technologies / Orlaco Camera System for a local shire council on their Komatsu GD 655 Grader.The GD 655 Grader has the Operators Cabin set low into the machine body, making it impossible for the Operator to view the Rear of the machine- especially with a Ripper attached as depicted.
The first Tyre Handlers have been installed with LSM Technologies / Orlaco Camera Solutions, designed by LSM Technologies and installed by our Bowen Basin Distributor- Videotronics- in MacKay.
LSM Technologies has a very long working history with Westrac in Western Australia, with supply of our complete range of specialised products, with design and installation of Lube Truck Equipment, Workshop Lubrication Equipment, Kidney Loop Filtration Systems, LSM Desiccant Breathers, Service Work, etc.
Red Australia selected a LSM Technologies / Orlaco Camera System for a Baumann Side Lifter for One Steel in Hobart.
LSM Technologies have established a close relationship with Joy Mining's- Stamler Australasia Division with the supply of their Vogel Automatic Lubrication Systems and Technical Services.
LSM Technologies / Orlaco Camera Solutions are quickly becoming Australia’s predominant viewing system for Work Area Vision and as a Critical Safety Devices for equipment utilised within the Mining Industry.The Komatsu WA1200 is quite a large Wheel Loader
LSM Technologies are proud, once again to be invited to Komatsu Australia's major customer / training event. LSM Technologies provided technical advise / training on their Vogel Automatic Centralised Lubrication Systems and new Orlaco Viewing / Camera Safety Solutions.
Merlo Spa- Italy utilise Orlaco Camera Solutions as standard on their Telehandlers to overcome critical Operator Viewing problems. Australian Bulk Material (ABM) Savage River have purchased a Merlo Telehandler with an Orlaco Camera at the end of the Boom so as the Operator can safely view the fork / attachments when using the machine.
QLD Nickel Port Authority are to receive a new Hyster F117 ECH (Empty Container Handler) Fork Truck.
LSM Technologies / Orlaco Camera solutions have been chosen by Crown Australia for their RR 5200 series Reach Trucks- especially for Cold Storage applications that can reach down to -40 deg C.
In February 2007, Karreman Quarries selected LSM Technologies to design / supply / install and commission a Automatic Centralised Lubrication System for their Jacues Jaw Crusher.
LSM Technologies Pty Ltd are proud to announce that Ranger Loaders Pty Ltd- has selected our LSM / Vogel Automatic Lubrication Systems for their range of Loaders.
The Sherrin family are well known icon in Queensland- previously- Sherrin Crane Hire and they have chosen LSM Technologies Autogreasers for their fleet.
Rio Tinto's Dampier Salt operates equipment in one of the most harshest and corrosive environments in the world- Salt Harvesting- and have chosen LSM Technologies / Orlaco Cameras for their harvesters and Dozer's.
Videotronics provides another solution with LSM Technologies / Orlaco Camera Solution on a D11R Dozer at Ensham Resources Mine Site.
Back in the latter part of 2006, Videotronics updated Ensham's #4 Bucyrus 8750-H Dragline with a Orlaco / LSM Technologies specialised Camera Solution.
Another problem solved at a Rio Tinto- Pilbara Irons Operations site in Dampier Western Australia. LSM Technologies were requested to fit an Orlaco Camera System to a Linde R35, three Stage Hydraulic Mast Lift Fork Truck, used to handle / 200 litre Drums of Iron Ore at extreme heights, preventing the need for the operator having to lean out of the Forklift when tipping their load into the sample hoppers.
Queensland Rail has taken delivery of their first LSM Technologies / Orlaco Camera Solution for one of their large Linde H70 Counterbalance Forklifts which is used to handle the Rolling Stock Axles in their storage facility.
Another very pleased Mine Operator has installed a LSM Technologies Orlaco Camera Solution by Videotronics in Mackay on their Terex O&K RH340 Excavator / Shovel.
Palma Persada - one of Indonesia's largest mining contractors had installed LSM Technologies / Orlaco Camera Systems to their Komatsu PC 3000 Excavators.
LSM Technologies Pty Ltd has been awarded a major contract with BHP Billiton Mitsubishi Alliance (BMA) Goonyella / Riverside Mine to fit Orlaco Camera Systems to meet their Collision Avoidance System (CAS) for their Dump Truck Fleet
Yet another specialised application satisfied by our Bowen Basin Distributor Videotronics using LSM Technologies Orlaco Camera Solutions.
LSM's Boewn Basin Distributor- Videotronics- has developed a Mobile Recording Trailer using LSM's / Orlaco Viewing Solutions.
Due to the increasing number of cameras that are being installed onto ships, cranes and drilling platforms, the need has arisen to display multiple camera images simultaneously.
John Hunt is one of the most courageous Australian Truckie's that the LSM Team have ever met. Some some years ago John was involved in a truck accident that left him a paraplegic.
Walsh & Ford have chosen LSM Technologies / Vogel Autogreasers for their Manure Spreaders. The first installation was in November 2005 with the Centralised Lubrication System operating in harsh conditions that has not missed a beat to date, providing reliable operation and savings to the end- user.
The Problem - Mobile mining equipment hydraulic systems are typically exposed to very high solid particle ingression rates. A mine using the Hitachi EX2500-1 excavator was experiencing premature component failure due to contamination
LSM Technologies have been fortunate to be chosen as the preferred supplier of Automatic Centralised Lubrication Systems (Autogreasers) and Camera Viewing Systems by Queensland's Hyundai Distributor- Eagle Equipment.
Recently, LSM Technologies was invited to attend Komatsu Australia's three day Field event- "Boots- On". The event was attended by more than 120 senior sales and management personnel of Komatsu's Construction and Quarrying Divisions for Australia, New Caledonia and New Zealand.
LSM Technologies were contracted by Premier Coal to design, supply and install for their Breather System for their Fuel Farm.
Brambles Industrial Services have been using LSM Technologies / Vogel Autogreasers for nearly 4 years now. All of BIS Heavy Haulage and Earthmoving Fleet are installed with LSM Technologies Autogreasers.
LSM Technologies were approached by their good customer Brambles (BIS Division) to supply and install an Orlaco Camera Viewing System, using RF (Radio Frequency) Receiver on the Cabin of the Truck and a Stainless Steel Compact Camera and Transmitter on the ROM- Feed Bin.
Shell in the UK are utilising our Orlaco Camera Viewing Solutions as part of their Safety Concept Tanker. The objectives are to provide better and safer operating conditions for the Driver as well as the public
Recently the LSM Team were provided with a challenge to install Orlaco Viewing Solutions to three Dump Trucks at BMA- Goonyella mine site.
LSM Technologies recently installed an Orlaco Camera Viewing Solution on a Bendi Forklift. Two Cameras have been employed with one as the Mast- over view and the other as a Carriage view.
ELG Re-Cycling specialises in the re-cycling of stainless steel. Stainless steel is scrapped and then top loaded into inverted containers, the problem that they faced was once the container was inverted they where not able to see if the scrap metal was clear of the container doors.
With its fleet of approximately one hundred low-loaders and extendable trailers Holtrop & Van der Vlist in Assen is one of the largest providers on the special transport market.
Transfield- a large Construction Company chose LSM Technologies- Orlaco Cameras Systems for their AD Trucks for one of their road construction projects.
In December 1999 Komatsu's plant in Hannover started installing central lubrication systems on its model WA-470-3 wheel loader as a standard feature.
The new Prospector high speed trains are installed with Vogel Wheel Flange Lubrication Systems.
OTS (Osenton Transport Services) have kindly allowed us to install Slider Curtain advertising on their interstate Trailers.