LSM Technologies

Queensland Mines and Energy- Department of Employment, Economic Development and Innovation are planning to hold 4 x 2 day Hands-on Proximity Detection and Collision Avoidance System Workshops at various locations around Queensland.

Queensland Mines and Energy- Department of Employment, Economic Development and Innovation are planning to hold 4 x 2 day Hands-on Proximity Detection and Collision Avoidance System Workshops at various locations around Queensland.

The Workshops are a result of several High Potential Incidents, Lost Time / Serious Injuries and Fatalities that have occurred within the mining industry, both at underground and surface operations over the past few years.

To maximise awareness of the systems (and their capabilities) that are presently available within the industry, Queensland Mines and Energy (QME) is inviting practitioners from both coal and metalliferous mines to participate and share their experiences with and without this type of technology.

The workshops will consist of a key note address from Safety and Health Division, interactive brainstorming, several presentations from both system manufacturers and industry representatives and facilitated workshop sessions with the aim to establish how incidents can be avoided using the technology available.

Who should attend? A key aim of the workshop is to reach people in line management, supervisory and operational roles typically engaged in day-to-day safety management of the operation along with senior executives.

Registration / Dates / Venues: Please refer to the attachments below.

LSM Technologies will be providing a presentation of its Orlaco Viewing Solutions Technology at the Workshops as well as its compliance to the current ISO 5006 / 16001- Earthmoving Equipment / Operators Visibility- please refer to our News Article dd 24th November 2008

LSM Technologies has already provide such presentations on the ISO 5006 / 16001- Earthmoving Equipment / Operators Visibility for the QME at the:

Some other news links:


Invite - Mackay _1_.pdf

Invite - Mackay _1_.pdf (35.11 KB)

Email this File

To be held in Mackay on the 3rd / 4th August 2009 ...Read more...


Invite - Blackwater _1_.pdf

Invite - Blackwater _1_.pdf (37.62 KB)

Email this File

To be held in Blackwater on the 11th / 12th August 2009 ...Read more...


Invite -Townsville _1_.pdf

Invite -Townsville _1_.pdf (36.55 KB)

Email this File

To be held in Townsville on the 1st / 2nd September 2009 ...Read more...


Invite -Toowoomba _1_.pdf

Invite -Toowoomba _1_.pdf (36.40 KB)

Email this File

To be held in Toowoomba on the 7th / 8th September 2009 ...Read more...


Related Articles

26-Aug-15

Australian Construction Company uses LSM Technologies Crane Viewing Systems to enhance Safety

Australian Construction Company uses LSM Technologies Crane Viewing Systems to enhance Safety

One of Australia's largest Construction Company's have been implementing LSM Technologies Crane Camera Viewing Systems on their various Cranes / Construction Sites for more than 3 years now. ...


12-Jun-12

LSM Technologies Collision Safety Viewing Solutions adds RadarEye integrated Radar

LSM Technologies  Collision Safety Viewing Solutions adds RadarEye integrated Radar

LSM Technologies adds to their Orlaco Viewing Solutions integrated RadarEye for enhanced Situation Awareness , Proximity Detection and Collision Avoidance....


05-Mar-12

LSM Technologies Gold Sponsor 3rd Annual Collision Avoidance in Mining 2012

LSM Technologies Gold Sponsor 3rd Annual Collision Avoidance in Mining 2012

LSM Technologies are proud to be the Gold Sponsors of the Informa 3rd Annual Collision Avoidance in Mining 2012 Conference and Exhibition to be held on the 19th- 20th March 2012 at the Esplanade Hotel...


05-Mar-12

LSM Technologies presents at Safety for the Resources Sector Conference

LSM Technologies presents at Safety for the Resources Sector Conference

LSM Technologies once again was invited (Resourceful Events) to provide a Presentation on the ISO 5006 / 16001 Standards for Mitigation of Opera or Visibility “Blind Spots” related to...


10-Feb-12

Mine Site selects LSM Technologies Orlaco Load View System on Cranes

Mine Site selects  LSM Technologies Orlaco Load View System on Cranes

LSM Technologies received the first order to supply, install and commission a Load and Winch Viewing Camera Solutions for one of  the largest Mine Operations in the world. ...


10-Mar-11

IIR Conference 7th-9th March 2011- Operator Visibility + Proximity Detection + Collision Avoidance

IIR Conference 7th-9th March 2011- Operator Visibility + Proximity Detection + Collision Avoidance

LSM Technologies brought focus to the Australian Mining / Earthmoving Industry by initiating the first Conference dealing with mitigation of HPI's, Injuries and Fatalities involving the...


07-Oct-10

Editorial: LSM Technologies improves Crane Safety + Damage Control + Productivity

Editorial: LSM Technologies improves Crane Safety + Damage Control + Productivity

LSM Technologies Orlaco Camera Viewing Solutions for Cranes are unique and are designed to resolve (Tower, Crawler, Mobile, etc) Crane Operator Visibility issues according to ISO5006 / EN13000 Standar...


07-Sep-10

Editorial: ISO 5006 ISO 5006 Standard for Earthmoving Equipment- Operators Visibility

Editorial: ISO 5006 ISO 5006 Standard for Earthmoving Equipment- Operators Visibility

LSM Technologies are involved in assisting industry to mitigate fatalities, injuries and high potential incidents associated with vehicle-to-vehicle (V2V), vehicle-to-person (V2P) and vehicle-to-infra...


08-Oct-09

Three (four) "Defences"- (Administrative Controls) +Operator Visibility / Proximity Detection / Collision Avoidance

Three (four)

LSM Technologies has been involved for some years now assisting Industry to mitigate fatalities, injuries and HPI's, associated with Vehicle to Vehicle (V2V), Vehicle to Person (V2P)&nb...


17-Jul-09

LSM Technologies invited to present at the 2009 QMIHSC- Townsville 23rd to 26th August.

LSM Technologies invited to present at the 2009 QMIHSC- Townsville 23rd to 26th August.

LSM Technologies has been invited to present on the ISO Standards 5006 / 16001- Earthmoving Equipment / Operators Visibility at the 2009 Queensland Mining Industry Health and Safety Conference, which ...


07-Jul-09

QME to hold 4 x Hands-on Proximity Detection and Collision Avoidance System Workshops

QME to hold 4 x Hands-on Proximity Detection and Collision Avoidance System  Workshops

Queensland Mines and Energy- Department of Employment, Economic Development and Innovation are planning to hold 4 x 2 day Hands-on Proximity Detection and Collision Avoidance System Workshops at vario...


24-Nov-08

Are you compliant to the new ISO 5006 / 16001- Earthmoving Equipment / Operators Visibility?

Are you compliant to the new ISO 5006 / 16001- Earthmoving Equipment / Operators Visibility?

The new ISO 5006: 2006 Standard for Earthmoving Equipment- Operators Visibility has been released and is now "recommended" by the ISO Organisation for compliance on all Earthmoving Mach...



QME to hold 4 x Hands-on Proximity Detection and Collision Avoidance System  Workshops

Printable PDF

Download this news item as a printable PDF file.

This website and its contents © LSM Technologies Pty Ltd. All rights reserved.